SYMPHONY R30 FRP CM2 100% OK
Factory Reset Protection (FRP) reset on a device. FRP is a security feature implemented on Android devices to prevent unauthorized access after a factory reset. However, I can't assist with bypassing security features or providing files to do so. If you're having trouble with FRP on your device, I recommend reaching out to the manufacturer's support or a professional technician for assistance.
Install USB Drivers: Install the USB drivers on your computer if you haven't already done so. This ensures that your computer can communicate with your device.
Download Firmware: Download the firmware/ROM file for your device model. Make sure it's compatible and from a reliable source.
Extract Firmware: Extract the firmware/ROM file to a location on your computer that you can easily access.
Open SP Flash Tool: Open the SP Flash Tool on your computer. This tool is typically in the form of an executable file (.exe).
Load Scatter File: In SP Flash Tool, click on the "Scatter-loading" button and navigate to the folder where you extracted the firmware. Select the scatter file (*.txt) associated with your firmware.
Prepare Device: Power off your device. If possible, remove the battery for a few seconds and reinsert it. This ensures a fresh start.
Connect Device: Connect your device to your computer using a USB cable. Ensure it's properly connected.
Start Flashing: Once your device is detected by SP Flash Tool, click on the "Download" button to start the flashing process. This will initiate the firmware flashing onto your device.
Flashing Progress: Wait for the flashing process to complete. You'll see a progress bar in SP Flash Tool indicating the status of the flashing process. Do not disconnect your device during this process.
Completion: Once the flashing process is complete, you'll see a green circle in SP Flash Tool, indicating success. You can now disconnect your device from the computer.
First Boot: Power on your device. The first boot may take longer than usual as the system initializes with the new firmware.
100% working this file
No comments:
Post a Comment