Itel IT1355M flash file

To flash an itel it1355m smartphone, you'll need to follow similar steps as outlined for other itel models. Here's a guide tailored specifically for the itel it1355m:

1. Download Necessary Files: Obtain the firmware file for your itel it1355m. Ensure that you download it from a reliable source.

2. Install USB Drivers: Install the appropriate USB drivers on your computer to enable communication between your itel it1355m and your computer during the flashing process.

3. Charge Your Device: Ensure that your itel it1355m has sufficient battery charge before you begin. A low battery during flashing could lead to issues.

4. Backup Data: Flashing your device will erase all data. Backup any important data such as contacts, messages, photos, and videos.

5. Enable USB Debugging: Go to the Settings menu on your itel it1355m, then navigate to Developer Options. Enable USB debugging. If Developer Options is not visible, go to About Phone and tap on the Build Number several times until Developer Options are enabled.

6. Power Off Your Device: Completely power off your itel it1355m.

7. Boot into Download Mode: Press and hold the Volume Down button, then connect your itel it1355m to your computer via USB cable. Keep holding the Volume Down button until your device enters Download Mode.

8. Run Flashing Software: Use a flashing tool suitable for your device. SP Flash Tool is a popular choice for MediaTek-based devices like itel. Open the flashing tool on your computer.

9. Load Firmware File: In the flashing tool, locate and load the firmware file you downloaded earlier.

10. Start Flashing Process: Once the firmware is loaded, initiate the flashing process by clicking on the appropriate button in the flashing tool. Follow any on-screen prompts or instructions.

11. Wait for Completion: The flashing process may take several minutes. Avoid disconnecting your itel it1355m from the computer or interrupting the process until it's finished.

12. Completion: After the flashing process is complete, you should see a success message on the flashing tool. You can then disconnect your itel it1355m from the computer and reboot it.

Remember that flashing your device carries risks, and if not done correctly, it can potentially brick your device. Ensure that you follow the instructions carefully and proceed at your own risk. If you're unsure or uncomfortable with the process, seek assistance from someone experienced in flashing Android devices.

IT1355M-M30-ZA-20160810

Download