Itel it1355m flash file

Fix Hang and Restart Problem Will Be Fix, After Flash Dead Hang Logo Blinking Display Will Be Fix if You Are used Wrong Version, After Flash Wrong Firmware Become Dead Show Only SPD Port, Keep Re Start & Show System Error Massage, Auto Recovery Mode & Auto Fast boot Mode Show Only, System Any Apps has been stopped Error Fix, unfortunately App has been stopped Apps error fix, Itel it1355m flash file

Flashing an Itel it1355m involves installing or updating the device's firmware, typically to fix issues or update the operating system. Here's a general guide on how to flash an Itel it1355m: Itel it1355m flash file

1. Backup Your Data: Before flashing your device, it's crucial to back up all your important data like contacts, messages, photos, and any other files to prevent data loss.

2. Download Required Files: You'll need the firmware file specific to your Itel it1355m model. Make sure to download it from a reliable source to avoid any issues. Additionally, you may need tools like SP Flash Tool or Miracle Box to flash the firmware.

3. Install USB Drivers: Ensure you have the appropriate USB drivers installed on your computer for your Itel it1355m. This ensures proper communication between your device and the computer during the flashing process.

4. Extract Firmware Files: If the firmware file you downloaded is compressed, extract it using a file extraction tool like WinRAR or 7-Zip. You should get files like scatter file, bootloader, recovery, etc.

5. Launch Flash Tool: Open the SP Flash Tool or Miracle Box on your computer. These tools are commonly used for flashing MediaTek-based devices like Itel it1355m flash file.

6. Load Scatter File: In SP Flash Tool, click on "Scatter-loading" and navigate to the firmware folder. Select the scatter file (*.txt) associated with your Itel it1355m firmware.

7. Prepare Your Device: Power off your Itel it1355m completely. Remove the battery if possible.Wait for Completion: The flashing process may take several minutes. Do not disconnect your device during this time. Once completed, you'll see a success message on the flash tool.

8. Reboot Your Device: After successful flashing, disconnect your device from the computer and reboot it. The first boot after flashing may take longer than usual.

9. Set Up Your Device: Once your device boots up, you may need to set it up again, including restoring your backed-up dat Itel it1355 flash file

IT1355M-M30-ZA-20160810

Download