Itel It1516 plus flash file

Flashing the Itel IT1516 Plus follows a similar process to flashing other Itel smartphones. Here's a general guide on how to flash the Itel IT1516 Plus:

1. Download the Firmware: Visit the official Itel website or trusted firmware repositories to download the specific firmware for your Itel IT1516 Plus model. Make sure to download the correct firmware version to avoid compatibility issues.

2. Install Flashing Tools: You'll need specific software tools to flash the firmware onto your device. SP Flash Tool is commonly used for flashing MediaTek devices like Itel smartphones. Download and install SP Flash Tool on your computer.

3. Extract Firmware: Once you've downloaded the firmware, extract the contents of the firmware package to a folder on your computer.

4. Prepare Your Device: Before flashing, ensure your Itel IT1516 Plus has enough battery charge to avoid interruptions during the flashing process. Backup any important data as flashing will erase all data on the device.

5. Launch SP Flash Tool: Open SP Flash Tool on your computer. It may require administrative privileges, so ensure you run it as an administrator.

6. Load Scatter File: In SP Flash Tool, click on the "Scatter-loading" button and navigate to the folder where you extracted the firmware files. Select the scatter file (usually ends with .txt extension) associated with your Itel IT1516 Plus.

7. Connect Your Device: Power off your Itel IT1516 Plus. Connect it to your computer using a USB cable while holding down the volume down or volume up button (depending on your device) to initiate the flashing process. SP Flash Tool should detect your device.

8. Begin Flashing: Once your device is detected, click on the "Download" or "Upgrade" button in SP Flash Tool to start the flashing process. This will begin flashing the firmware onto your Itel IT1516 Plus.

9. Flashing Complete: After the flashing process is complete, you should see a green "Download OK" message in SP Flash Tool, indicating successful flashing. You can now disconnect your device from the computer and power it on.

10. First Boot: During the first boot after flashing, your Itel IT1516 Plus might take longer than usual to boot up as it configures the new firmware. Be patient.

Remember, flashing your device carries risks, and if not done correctly, it can potentially brick your device. Ensure you follow the instructions carefully and proceed with caution. If you're unsure, it might be best to seek assistance from someone with experience in flashing smartphones.

it1516Plus-C195B-5.1-OP-BD-VN-20170121

Download