LAVA BENCO V7 flash file

 LAVA BENCO V7 flash file

Flashing your Lava Benco V7 flash file involves installing a new firmware or custom ROM onto the device. This can be useful for fixing software issues, removing bloatware, or updating the phone to a newer version of Android. Here is a detailed step-by-step guide to flash your Lava Benco V7 flash file.

Warning

• Backup Your Data: Flashing your phone will erase all data on it. Ensure you back up your important data.
• Risk: Flashing can potentially brick your device if not done correctly. Proceed with caution.

Requirements

1. A Windows PC.
2. USB Cable: To connect your Lava Benco V7 to the PC.
3. SP Flash Tool: Software used for flashing firmware.
4. MTK VCOM Drivers: Drivers needed for the PC to recognize your device.
5. Firmware/Stock ROM for Lava Benco V7: The official or custom ROM you want to flash.

Steps to Flash Lava Benco V7 flash file

Step 1: Download Necessary Files

1. SP Flash Tool: Download SP Flash Tool
2. MTK VCOM Drivers: Download MTK VCOM Drivers
3. Lava Benco V7 Firmware: Ensure you download the correct firmware for your device model. You can find it on trusted forums or websites like Needrom or Stock ROM.

Step 2: Install MTK VCOM Drivers

1. Extract the downloaded MTK VCOM Drivers.
2. Open Device Manager on your PC.
3. Click on "Action" > "Add legacy hardware".
4. Click "Next" > Select "Install the hardware that I manually select from a list (Advanced)" > "Next".
5. Select "Show All Devices" > "Have Disk".
6. Browse to the folder where you extracted the MTK VCOM Drivers, select the .inf file, and install it.
7. Complete the installation process and restart your PC.

Step 3: Prepare the SP Flash Tool

1. Extract the downloaded SP Flash Tool.
2. Open the SP Flash Tool folder and run "flash_tool.exe" as an administrator.
3. Click on the "Scatter-loading" button and locate the scatter file in the firmware folder (it typically has a .txt extension).

Step 4: Flash the Firmware

1. In SP Flash Tool, ensure "Download Only" is selected from the dropdown menu.
2. Click the "Download" button.
3. Turn off your Lava Benco V7.
4. Connect your device to the PC via the USB cable.
5. The flashing process should start automatically. If not, you may need to press a combination of volume buttons to get the PC to recognize the device.
6. Wait for the process to complete; you should see a green checkmark indicating a successful flash.

Step 5: Final Steps

1. Disconnect your device and close SP Flash Tool.
2. Turn on your Lava Benco V7. The first boot may take a while as it initializes the new firmware.

Troubleshooting

• Device Not Recognized: Ensure that the MTK VCOM drivers are installed correctly. Try using a different USB port or cable.
• Flashing Failed: Check that you are using the correct scatter file and firmware for your model. Ensure all files are properly extracted and not corrupted.

Conclusion

By following these steps, you can successfully flash your Lava Benco V7. This process can help resolve software issues and update your device. Always ensure you use the correct firmware and follow the steps carefully to avoid any issues.

LAVA_BENCO_V7_LE9920_P_SP9832E_V9_READ

Download