Zelta D100 flash file

 Zelta D100 flash file

Flashing the firmware on your Zelta D100 involves a few steps that require careful attention. Here’s a detailed guide to help you through the process:

Requirements:

1. Backup Data: Flashing firmware will erase all data on your device. Make sure to back up important data.
2. Battery Charge: Ensure your phone has at least 50% battery.
3. PC/Laptop: You’ll need a computer to perform the flashing.

Necessary Downloads:

1. Firmware File: Download the official stock firmware for Zelta D100 from a reliable source.
2. SP Flash Tool: This is the tool used to flash the firmware onto your device. You can download it for Windows or Linux.
3. USB Drivers: Download and install the MediaTek USB drivers to ensure proper communication between your phone and computer.

Steps to Flash Firmware:

1. Extract Files:

   • Extract the downloaded firmware zip file to a folder on your computer.
   • Extract the SP Flash Tool zip file to another folder.

2. Install USB Drivers:

   • Install the MediaTek USB drivers on your computer. If already installed, you can skip this step.

3. Prepare SP Flash Tool:

   • Open the SP Flash Tool folder and launch the flash_tool.exe file.

4. Load Scatter File:

   • In the SP Flash Tool, click on the "Scatter-loading" button.
   • Navigate to the extracted firmware folder and select the scatter file (usually a .txt file).

5. Configure Flash Tool:

   • Ensure that all necessary files are loaded and that the preloader option is unchecked to avoid bricking the device.

6. Start Flashing Process:

   • Click on the "Download" button in SP Flash Tool.
   • Power off your Zelta D100 and, if removable, take out the battery.
   • Connect your phone to the computer using a USB cable. If the battery is removable, connect it without the battery and press the volume up or down button for detection.

7. Wait for Completion:

   • The flashing process will start automatically. Wait until you see a green checkmark indicating the process is complete.

8. Reboot Your Device:

   • Disconnect your phone and turn it on. It should now boot with the new firmware.

Important Notes:

• Do not disconnect your device during the flashing process.
• Ensure you have a stable USB connection to avoid interruptions.

By following these steps, you should be able to successfully flash the firmware on your Zelta D100. If you encounter any issues, you can refer to detailed guides available on sites like Aio Mobile Stuff and Flash Guide​ (Aio Mobile Stuff)​​ (Flash Guide)​.

Download

ChatGPT can make mistakes. Check important info.

Download