Redmi 10 2022(selene) Global flash file

 

Flashing the firmware on a Redmi 10 (2022) - codename "Selene" involves several steps to ensure that the process is carried out safely. Flashing refers to installing or upgrading the phone’s operating system, which could be the stock ROM or custom ROM, depending on your goal. Here’s a step-by-step guide for flashing the global firmware on your device:

Important:

• Backup all your data before flashing because this process usually wipes your phone’s data.
• Ensure your phone is fully charged (at least 50% battery).
• Unlock the bootloader if it's not already unlocked.
• Follow the steps carefully to avoid bricking your device.

Requirements:

1. MIUI ROM (Global Stable ROM) that matches your device’s codename "Selene".
2. Mi Flash Tool or Fastboot/ADB (depending on your flashing method).
3. USB drivers for your device installed on your computer.

Steps to Flash Redmi 10 (2022) Global ROM:

Method 1: Using MI Flash Tool (for Fastboot ROM)

Step 1: Unlock Bootloader (If not already done)

1. Go to Mi Unlock website and sign in with your Mi account.
2. Follow the instructions to unlock the bootloader (this will wipe your data).
3. Make sure USB Debugging and OEM Unlocking are enabled:
   • Go to Settings > About Phone, tap on MIUI Version 7 times to unlock Developer options.
   • Go to Settings > Additional Settings > Developer Options, enable OEM Unlocking and USB Debugging.

Step 2: Install Mi Flash Tool

1. Download and install Mi Flash Tool on your Windows PC.
2. Download the Fastboot ROM for Redmi 10 (2022), make sure it's the correct version for your region (Global version).
3. Extract the Fastboot ROM zip file to a folder on your PC.

Step 3: Boot Your Device into Fastboot Mode

1. Power off your device.
2. Press and hold the Volume Down button + Power button simultaneously until you see the Fastboot screen (it says “Fastboot” or shows a Mi Bunny logo).

Step 4: Flash the ROM

1. Connect your phone to your PC using a USB cable.
2. Open Mi Flash Tool on your PC.
3. In Mi Flash Tool, click on Select and navigate to the folder where you extracted the Fastboot ROM.
4. Select the folder and click on OK.
5. Click Refresh to make sure Mi Flash Tool detects your device.
6. Click Flash to start the flashing process. Wait for the process to complete.
7. Once finished, your phone will automatically reboot.

Method 2: Using ADB and Fastboot (Advanced)

Step 1: Set up ADB and Fastboot

1. Download and install the ADB and Fastboot tools on your PC.
2. Extract the tools to a folder and open a command window in that folder (Shift + Right-click > Open Command Window).

Step 2: Boot into Fastboot Mode

1. Connect your phone to the PC.

2. Open a command window and type:

    

   This will list the connected devices. If your device appears, you are ready to proceed.

3. Type the following command to boot into fastboot mode:

Step 3: Flash the Fastboot ROM

1. Download the Fastboot ROM for Redmi 10 (Selene).
2. Extract the Fastboot ROM to a folder.
3. In the command window, navigate to the folder where you extracted the ROM files.
4. Flash the ROM with the following commands

Download