Infinix X6835 (HOT 30 PLAY) flash file

 Infinix X6835 (HOT 30 PLAY) flash file

Flashing your Infinix X6835 (HOT 30 Play) involves installing a new firmware or ROM onto your device. This can be useful for upgrading, downgrading, or fixing software issues. Follow these steps carefully to flash your device:

Preparation

Infinix X6835 (HOT 30 PLAY) flash file

1. Backup Your Data: Flashing will erase all data on your phone. Make sure to back up any important information.
2. Battery Charge: Ensure your phone is at least 60-70% charged.

Infinix X6835 (HOT 30 PLAY) flash file

1. Download Necessary Files:
   • Firmware/ROM: Download the correct firmware for your Infinix HOT 30 Play. Ensure it matches your device model exactly.
   • SP Flash Tool: This tool is used to flash the firmware onto your device.
   • VCOM Drivers: Necessary for your computer to recognize your device in flash mode.
2. Extract Files: Extract the downloaded firmware and SP Flash Tool files to an easily accessible location on your computer.

Flashing Steps

Infinix X6835 (HOT 30 PLAY) flash file

1. Install VCOM Drivers:

   • Download and install the VCOM drivers on your computer. This step might require disabling driver signature enforcement on Windows.

2. Open SP Flash Tool:

   • Navigate to the extracted SP Flash Tool folder and open flash_tool.exe.

3. Load the Scatter File:

   • Click on the "Choose" button in the Scatter-loading file section.
   • Navigate to the firmware folder and select the scatter file (usually named MTxxxx_Android_scatter.txt).

4. Configure SP Flash Tool:

   • Once the scatter file is loaded, you will see a list of firmware components.
   • Ensure all necessary partitions (such as boot, system, recovery) are checked.

5. Download Mode:

   • Select "Download Only" from the dropdown menu (or "Firmware Upgrade" if you need to upgrade the firmware).

6. Connect Your Device:

   • Turn off your Infinix HOT 30 Play.
   • Press and hold the volume down or volume up button (this varies by device) and connect it to your computer using a USB cable.
   • SP Flash Tool should detect the device and start the flashing process automatically.

7. Flashing Process:

   • Wait for the flashing process to complete. Do not disconnect your device during this process.
   • You will see a green checkmark indicating that the flashing process is complete.

8. Reboot Your Device:

   • Disconnect your device and turn it on. The first boot may take longer than usual.

Troubleshooting

• Device Not Recognized: Ensure VCOM drivers are correctly installed and that you are using a functional USB cable and port.
• Stuck at Boot Logo: This might require a factory reset. Boot into recovery mode (usually by pressing volume up + power button) and perform a factory reset.

Important Notes

• Risk of Bricking: Flashing firmware incorrectly can brick your device. Ensure you follow the steps carefully and use the correct firmware for your model.
• Warranty: Flashing your device might void its warranty. Check the warranty terms before proceeding.

By following these steps, you should be able to flash your Infinix HOT 30 Play successfully.

 

 X6835__40_HOT_30_PLAY__41

Download